Lista de verificação para instalação de carpete novo: como planejar a instalação do carpete

You’re ready for new carpet, that’s for sure. But is your home? Besides picking out your favorite carpet, there are a few steps you’ll need to take to prepare for installation.

To make it easier, we’ve put the carpet installation “must-dos” into three simple categories:

• Antes de instalar o carpete
• Durante a instalação do carpete
• Após a instalação do carpete

Even if you’re hiring someone to install it, this checklist is your guide to a successful installation.

Antes de instalar o carpete: os cinco passos essenciais

Antes da instalação, você pode usar o medidor de umidade C555 como um primeiro passo fácil para avaliar a umidade de um contrapiso de concreto.

1. Meça seu espaço

Measure the room where you’ll install carpet so you buy the right amount of carpet and padding. Knowing your square footage will also help you estimate your installation cost and waste.

(Pro tip: Graph paper can help with dimensions and layout.)

2. Feche completamente o local

Windows and doors should be installed and closed, and your HVAC system should be up and running properly.

3. Conclua todo o trabalho prévio

Finish any drywall work, painting, or other wet work before the carpet goes in. Paint the baseboards and trim at least 24 hours before installation so they have time to dry.

4. Limpe o espaço

Remove furniture and other items from the installation area, including electrical equipment and wires. Cover entryways and vents to help contain dust and debris, and create a clear path to the installation area.

(Pro tip: Cover any furniture or floors along that path.)

5. Check Temperature, Humidity, and Moisture Levels

The Carpet and Rug Institute’s CRI 105 residential installation standard calls for an indoor temperature of 65°F to 95°F and relative humidity no higher than 65%, maintained for at least 48 hours before, during, and 72 hours after installation.

Also check the moisture of the subfloor. If it’s concrete, our Medidor de umidade de concreto C555 is an easy first step to assess moisture quickly.

For a detailed picture of the moisture inside the slab, use an in-situ relative humidity (RH) test following ASTM F2170, and compare the results with the carpet and adhesive manufacturers’ requirements.

Durante a instalação do carpete: três etapas fáceis

For most DIYers, your best bet is to rent the tools you’ll need, such as a carpet stretcher.

1. Alugue ferramentas especiais para carpetes

Trust us, it’s not worth trying to go without a carpet stretcher. And it’s usually not worth buying one unless you plan to install carpet often.

Your best bet as a DIYer is to rent specialty tools like a power stretcher and knee kicker and learn how to use them. You’ll also need basics like a carpet knife and a carpet roller.

(Dica profissional: o YouTube será seu melhor amigo.)

2. Instale tiras adesivas

These are a must. If you’re replacing old carpet, you can reuse the tack strips already in place, except for any pieces that need replacing. If you’re installing new tack strips, leave a gap between the strips and the wall.

(Pro tip: CRI 105 calls for this gap to be slightly less than the thickness of the carpet and no more than 3/8 inch.)

3. Instale carpete e estofamento

Always put a good layer of padding under the carpet, and don’t lay it over the tack strips. Trim it flush with the inside edge of the tack strips so it sits inside the perimeter.

Após a instalação do carpete: três etapas finais

1. Limpar

Remove all leftover materials, tools, and trash, and vacuum the entire installation area. Touch up the paint if needed.

2. Inspecione a instalação

Take your time. You’ll be looking at it every day, so make sure it meets your standards. This is also a good time to research or pergunte ao seu instalador how to care for your new carpet.

3. Restaure seu espaço

Carefully move furniture and other items back into place. Use protectors on furniture feet to avoid damaging the carpet.

Planning a carpet installation means considering many factors, but anyone can install carpet with the right tools and knowledge.

With this checklist, you’re set up for a successful, professional-looking installation.

Now sit back, relax, and enjoy your beautiful new space. Cheers to a job well done!

Is your carpet starting to smell or having other issues? Learn more about por que seu carpete cheira mal.

Loja Rapid RH

Jason Wright

Jason Wright, especialista em desenvolvimento de negócios para novos produtos, ingressou na Wagner Meters em 2019. Ele chega à Wagner com mais de 35 anos de experiência no setor de pisos.

Última atualização em 8 de outubro de 2026